Skip to main content

Audi Maintenance Tips for the Spring

Audi Maintenance Tips for the Spring

After the winter, your Audi will need some maintenance services in order to perform at its best. The following list will help you prioritize the most important things you will need to do or to have done for you.

First things first, have the tires changed if they are currently winter ones. If they are all-season tires, there is a possibility that you will not need to change them, but that would depend on how worn out the tread is. You can perform the penny or quarter test to determine if the tread is sufficient.

It will be a good idea to check the wheel alignment. You can do so while you are driving, just pay attention and if you notice the car drifting to one side then your Audi probably needs an alignment.

Have the oil and filter changed at an auto repair shop after the winter ends in preparation for the upcoming warmer months of the spring.

If you notice that the wiper blades of your Audi have lost their integrity, you should change them or have them changed by a professional mechanic. Should you choose to change them yourself, you have to be careful with the size of the wiper blades, you will need to get the same size as yours so that they fit.

Hopefully, the tips above will be useful when you are getting your Audi ready for the spring.

Comments

Post a Comment

Popular posts from this blog

4 Signs That Indicate Your BMW is in Need of Tune-Up

4 Signs That Indicate Your BMW is in Need of Tune-Up
Whether you drive a vintage, late-model or brand-new BMW, remember that at some point, your car will be in need of a tune-up service. Although modern cars don't need frequent servicing like the old models, it's still very important to service your BMW according to your owner's manual in order to avoid any serious problems in the long run. Basically, this means that if you drive a newer model. you have to schedule a tune-up every 30,000 miles, and if you own an older model, you have to do it every 10,000 to 20,000 miles.

Apart from the routine maintenance services, you also have to look out for these 4 common signs that indicate your BMW is in need of a tune-up.

Difficulties When Starting Your Car
When the engine of your car does not turn over, this is mainly due to a malfunction of ignition, battery, or fuel pump. This is not a serious issue and an expert auto technician would easily diagnose it. If your BMW takes some t…
38 comments
Read more

Child safety in the vehicle

We all know that child car safety is quite simple, provided that you follow a couple of simple steps. The first thing you need to do is to fit child restraints correctly and make sure you always buckle your kids into them correctly. In addition, it's equally important to seat your kids appropriately so that you can avoid any fighting between them and keep them happy while on the road.

Child Restraint Basics
The first item related to child car safety that we're going to look into is the child restraint. It's an absolute must for children aged up to 7 years to travel in a child restraint. You must remember to always choose, properly fit, and use the right child restraint suitable for your child's age and size. Once your kid's shoulders reach higher than the upper shoulder height marker seen on child restraints, your kid will be ready to move to a bigger child restraint.

Seatbelts
You can set a great example for your kids if you start wearing your own seatbelt on regul…
11 comments
Read more

The rise of the automotive industry in Kansas City

The rise of the automotive industry in Kansas City
Kansas City is officially the nation's second-largest auto hub. City’s long history of auto production dates back to 1913 when Henry Ford made a decision to choose this region to be the first one outside of Detroit for auto production. The most recent expansion of Ford Motor Co. in this particular area was in 2011. At that time, the company announced a $1.2 billion investment that was meant to expand and retool Kansas City Assembly Plant, which is located in Claycomo. This plant is responsible for manufacturing the Transit and the F-150 full-size van.

Ford has a strong and steady relationship with area school districts which are part of the company’s Next Generation Learning initiative. Launched in 2006, that initiative provides mentoring, technical support, coaching, and financial support to 20 communities around the country.

Kansas City Assembly Plant uses interesting and innovative supply chain structure called Automotive Alle…
17 comments
Read more